Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in Pasadena, TX | Knight Locksmiths
We provide independent Schlage locksmith service across Pasadena, from Southmore to Deepwater and every brick-ranch block between, and we also offer Car Key Replacement in Pasadena. The thing that separates our Schlage work here is simple: we know what ship-channel salinity and decades of humidity do to brass cylinders, painted-over knobsets, and strike plates. If you need a Schlage lock rekeyed, replaced, or rebuilt in Pasadena, call (833) 589-8049 and you’ll get a straight answer before we ever roll a truck.
Why Pasadena Residents Choose Us for Schlage Service
Schlage is one of the eight lock brands we train on as a company, and it’s probably the one we see most in Pasadena’s 1950s-70s housing stock. Glen Pickett, our owner, grew up in Knight, Texas and trained through the locksmithing and security systems program at Alvin Community College before spending close to three decades working locks in this region. That means when we walk up to a 1960s brick ranch off Southmore with a seized Schlage deadbolt, we’ve seen that exact job hundreds of times. We carry OEM-compatible Schlage cylinders, pins, and latch assemblies, and we’re honest about when a rebuild beats a replacement. Our team handles everything from a basic Schlage F-Series knobset rekey to a full B60 deadbolt install with door reinforcement. We’re an independent Schlage service provider, not authorized or sponsored by Schlage, which means we answer to you, not a manufacturer’s program requirements. For full Schlage sales & service details, you can see how we approach the brand across our whole service footprint.
Styles & brands we work with







Common Schlage Locksmith Problems We Solve in Pasadena
- Seized B60 brass cylinders from ship-channel salinity. Pasadena’s humidity carries salt from the Houston Ship Channel, and it works its way into the pin chambers of Schlage deadbolts. Springs corrode, pins stick, and keys stop turning. We take the cylinder apart, clean or replace the pins, and get it back to smooth operation, or we swap in a fresh OEM cylinder when the old one is too far gone.
- Painted-over original Schlage knobsets in 1950s-70s homes. A lot of Pasadena’s older homes have had their original hardware painted over during decades of flips and touch-ups. The result is a knobset or deadbolt that moves hard or not at all, with a latch that won’t retract cleanly. We remove the old hardware, clean the door prep, and install a new Schlage that actually works.
- Encode and Sense smart lock failures after heat and storm moisture. Pasadena’s summer heat bakes exterior doors, and tropical storm season pushes damp air into electronics bays. Smart Schlage keypads and internals fail more often here than in drier inland suburbs. We diagnose whether it’s a battery tray issue, a corroded contact, or a dead PCB, then replace only what’s needed.
- Deadbolt bolts that no longer seat into the strike plate. Older Pasadena door frames settle, and years of humidity swell and warp wood. The Schlage bolt stops lining up with the strike, so the door won’t secure even though the deadbolt itself is fine. We realign or replace the strike plate, reinforce the frame where needed, and get your door locking again.
- Keys snapping off in Schlage cylinders. It happens more than people expect in this trade, and we’ve fished broken Schlage keys out of locks all over Pasadena. Once the key’s out, we check the cylinder for damage and cut a new key or rekey the cylinder on the spot.
Schlage Service in Pasadena: What Local Conditions Mean for Your Equipment
Here’s the one thing about Pasadena that changes how Schlage work goes here compared to almost anywhere else in the Houston area. In neighborhoods like Southmore and Deepwater, many homes still have the original Schlage knobsets and deadbolts installed when the houses were built in the 1950s and 60s. Those locksets have spent 50 to 70 years soaking in salt-laden humidity from the nearby ship channel. The brass cylinders have pitted, the internal springs have weakened, and the hardware has often been painted over so thoroughly that the faceplate looks like it’s part of the door. A “simple rekey” on one of these locks frequently turns into a job where we’re chiseling out the old lockset, re-prepping the door for modern hardware dimensions, and rebuilding the cylinder from scratch if the customer wants to keep the original. That’s not a problem you encounter in newer Houston suburbs where doors are prepped to current spec and hardware hasn’t had six decades of salt air. It’s why we carry a broader range of Schlage parts than a typical locksmith working newer stock, and why we always tell Pasadena customers upfront what the job will actually involve before we quote it. Glen’s approach to that never wavers: figure out the problem first. Everything else follows.
Schlage Models & Products We Service in Pasadena
We work on the full Schlage residential range plus the commercial line that shows up in small businesses around Pasadena. That covers the B60N single-cylinder deadbolt, the F-Series including F51 and F58 knot and lever designs, the Encode and Sense smart deadbolts, and the commercial ND-Series cylindrical locksets. We use genuine Schlage OEM cylinders, pins, and latch assemblies on the locks worth keeping, and we’re not shy about telling you when a quality aftermarket strike plate or reinforcement kit makes more sense than paying OEM premium for a part that doesn’t need Schlage branding. We stock the most common Schlage parts locally for fast Pasadena turnaround, and anything unusual gets ordered same-day where available.
Schlage Service Pricing in Pasadena
Schlage rekey service in Pasadena typically runs $20 to $35 per cylinder or $75 to $150 for a standard rekey job covering multiple locks. Deadbolt installation on a prepared door lands in the $80 to $180 range, while removing a corroded or painted-over old lockset and re-prepping the door usually adds $40 to $90 in labor. Smart lock installation for Encode or Sense units runs $100 to $250 depending on door modification. You get a free estimate with the full price quoted on the phone before anyone is dispatched, and that’s the number on your invoice. There’s no call-out surcharge added when we show up. Call (833) 589-8049 for an exact quote on your Schlage job in Pasadena.
Serving Pasadena, TX — Our Local Coverage Area
We’re based in the Pasadena area and know this community well, including nearby Schlage in Deer Park. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in Pasadena
Yes, and we do it regularly in Pasadena’s older neighborhoods and can provide Shoreacres Schlage service as well. The caveat is that if your original Schlage cylinder has severe salt-water pitting or broken springs from decades of ship-channel humidity, we may recommend replacing the cylinder or upgrading the lockset entirely, and we’ll show you why before we proceed. Call (833) 589-8049 to describe what you have and we’ll give you a straight answer.
In Pasadena, the answer is almost always humidity combined with heat expansion. Brass Schlage cylinders absorb thermal energy, the internal pins and springs react to moisture, and everything swells just enough to make the key hard to turn or the bolt sluggish. We clean, lubricate, and if needed replace the cylinder pins to restore smooth operation.
We do, and we’ll wire them up and configure the keypad or app as part of the install. One piece of advice from doing these in Pasadena: if your exterior door gets direct afternoon sun, use high-quality alkaline or lithium batteries rated for heat, because Gulf Coast summers shorten battery life on any smart lock. Call (833) 589-8049 and we can walk you through which Schlage smart model fits your door before we schedule anything.
Yes. If your current Schlage uses the standard SC1 keyway, we can key your new B60 or other Schlage lock to match the key you already have, so you don’t carry extra keys. It’s one of the most common requests we handle, and it usually takes minutes once we’re at the lock.
Yes, and this is a very common repair in Pasadena’s older homes where door frames have settled or wood has swelled from humidity. We realign or replace the strike plate, shim or reinforce the frame, and often add a longer strike screw that anchors into the door stud for better security. Call (833) 589-8049 for an estimate on the alignment work.
Service Areas Near Pasadena
Beyond Pasadena, we handle Schlage service calls in nearby communities around the Houston Ship Channel region and into the residential corridors east and northeast. We work in Pasadena service area communities and also help customers in Schlage service in South Houston and Schlage service in Galena Park. If you’re in Pecan Grove or out toward Richmond, give us a call and we’ll confirm routing for your location.
Book Your Schlage Service in Pasadena Today
Need a Schlage lock rekeyed, rebuilt, or replaced in Pasadena? Let’s get it handled. Call (833) 589-8049 now for a free estimate, and we’ll quote your full price on the phone before anyone heads your way. Same-day service is available for most Schlage jobs in Pasadena and for Schlage service in Webster.
Written by Glen Pickett, Owner at Knight Locksmiths, serving Pasadena since opening our doors after training through the Alvin Community College locksmithing program.