Smart locks
House lockouts
Re-keying
Deadbolt upgrades
Schlage
Kwikset
Car keys & fobsNon-destructive entry first, always - and we re-key Schlage, Kwikset, and Baldwin locks on the spot while you watch
You get a price before we start. It does not change when we arrive. No surprises.
Get your free estimateSchlage Locksmith in South Houston, TX | Knight Locksmiths
We provide independent Schlage repair, rekeying, and installation across South Houston, Texas, with a truck stocked for the hardware this city actually uses. For urgent situations, our South Houston Emergency Locksmith team is ready to respond. The difference in 77587 is that Schlage work here spans two jobs in one afternoon: a rusted F-series deadbolt on a 1950s bungalow and a keyed-alike padlock cluster on a truck yard gate a few streets over. Same brand, same climate, same afternoon. Call Knight Locksmiths at (833) 589-8049 for a straight answer and a free estimate before anyone rolls.
Why South Houston Residents Choose Us for Schlage Service
South Houston locks don’t age the way locks do in drier parts of the metro. Gulf humidity creeps into cylinders, slab-on-grade doors swell against their jambs, and the old rail-corridor layout means many properties carry more gate and padlock hardware than interior deadbolts. We work on that mix every week, and we know which Schlage parts hold up here and which ones don’t. Glen Pickett, our owner and lead locksmith, trained at Alvin Community College and spent nearly three decades working locks across this part of Harris County before founding Knight Locksmiths. He still lives near Knight, Texas, and he works methodically: no damage to your door frame, no guesswork, no unnecessary replacement. We’re independent and not authorized by Schlage, which means our recommendation is based on what your lock needs, not a manufacturer program. We also carry Schlage sales & service parts on the truck so we’re not making a second trip across town.
Styles & brands we work with







Common Schlage Locksmith Problems We Solve in South Houston
- Rusted and seized deadbolts from Gulf Coast moisture. Driving rain against slab-on-grade doors on 1940s and 50s bungalows works its way into Schlage B360 and F-series deadbolts until keys drag, stick, or snap in the cylinder. We tear down, clean, and rebuild where possible, and we replace with OEM when the pin chambers are too far gone.
- Deadbolts that won’t throw after a hot summer. South Houston’s heat-and-freeze cycles warp wood doors and sag frames, so an F51 or F58 deadbolt stops lining up with its strike plate. The bolt jams halfway. We correct the alignment, replace worn strikes, and service the cylinder so the throw is smooth again.
- Schlage cylinders forced into mismatched preps on rentals. South Houston has a lot of converted and subdivided postwar housing, and we regularly see a Schlage cylinder dropped into an old mortise prep or a bore drilled too shallow. It binds, wears pins unevenly, and eventually fails. We re-cut the prep correctly and set the cylinder so it actually works.
- Keyed-alike clusters that have worn out unevenly. Warehouses and residential blocks sit side by side along the old GH&H rail corridor, so many South Houston properties run one Schlage key across a house deadbolt, a back gate, and two or three padlocks. When one cylinder wears faster than the rest, the key stops turning in just that lock. We rebuild the worn cylinder and re-cut the key set so the whole cluster works again.
- BE365 keypad deadbolts with dead batteries or failed motors. South Houston heat shortens battery life faster than the packaging claims, and the motorized bolt on Schlage electronic deadbolts can fail after a few rough summers. We diagnose and either replace the internals or swap in a mechanical B60 if the electronics aren’t worth saving.
Schlage Service in South Houston: What Local Conditions Mean for Your Equipment
South Houston sits on the old Galveston, Houston & Henderson rail and petrochemical-freight corridor, and that history left warehouses stacked directly against residential blocks. Walk a few streets in 77587 and you’ll see a 1950s frame bungalow sharing a fence line with a metal-clad industrial bay. That layout is why so many properties here carry multiple padlock and gate locks meant to be keyed-alike rather than a single deadbolt, and why a Schlage master-key call in South Houston is as routine as a house rekey. It also means your exterior Schlage hardware gets the worst of both worlds: residential humidity exposure and commercial-grade duty cycles. A keyed-alike Schlage cylinder on a gate lock that gets cycled forty times a day in salt-heavy air wears faster than the same cylinder would on a suburban front door in Pearland. Our Schlage in Jacinto City and South Houston service approach accounts for that. We rebuild before we replace, we key-alike correctly so the cluster wears evenly, and we use OEM Schlage cylinders wherever security and fit matter.
Schlage Models & Products We Service in South Houston
We service the Schlage lines we see most in 77587: F-Series keyed knobs and deadbolt combos (F51, F58), B360 and B60 heavy-duty commercial cylindrical deadbolts, BE365 keypad deadbolts and FE595 electronic deadbolts, and ND-Series commercial cylindrical locksets. On anything where security, warranty, or fit matters, we install genuine Schlage OEM cylinders and deadbolts. Where OEM adds cost without benefit, we use quality aftermarket pins, springs, and strike hardware. For older Schlage hardware on South Houston’s postwar housing stock, we rekey and rebuild rather than upsell a full replacement whenever the body and bolt are still sound. That keeps a 1950s F-series deadbolt working for another decade instead of sending it to a landfill.
Schlage Service Pricing in South Houston
Expect a Schlage rekey in South Houston to run roughly $85 to $160 for a standard deadbolt and knob set, depending on cylinder condition and how many keys you need cut. Deadbolt installation starts around $140 and goes up with hardware grade and door prep. Master key system setup for a small industrial tenant starts in the $250 to $500 range depending on the number of cylinders and key levels. The price we quote on the phone is the price on the invoice, no call-out surcharge added when the tech arrives. If a deadbolt is rusted through but the door frame is sound, we’ll tell you a rebuild makes more sense than a replacement. Call (833) 589-8049 and we’ll give you an honest number before anyone is dispatched.
Serving South Houston, TX — Our Local Coverage Area
We’re based in the South Houston area and know this community well, and we also provide Schlage service in Pasadena. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Schlage Locksmith in South Houston
Yes. We rekey most Schlage cylinders to a single key, including F-series deadbolts, B360 commercial deadbolts, and the common padlock and gate lock bodies found on South Houston’s rail-corridor properties. We’ll inspect each cylinder first because uneven wear on a heavily cycled gate lock can prevent smooth keying. One key, one ring. Call (833) 589-8049 to have us take a look.
The most common cause in South Houston is a sagging door or swollen jamb pulling the bolt out of alignment with the strike plate, so the key has to fight the deadbolt before it can throw. Gulf humidity also swells wood jambs and rust builds inside old cylinders. We realign the strike, service or replace the cylinder, and get the throw smooth again. Call (833) 589-8049 and we’ll fix it in one visit.
We stock genuine Schlage OEM cylinders and deadbolts for F-series and B-series hardware, and we carry the pins, springs, and strike hardware to rebuild older Schlage locks on South Houston’s postwar homes. For obsolete mortise cylinders we source OEM if it’s available and tell you plainly when an aftermarket rebuild makes more sense. We’ll never sell you a full replacement when the existing body and bolt are still sound.
Yes. We build Schlage master key systems for small industrial tenants and property owners across South Houston, including the warehouse blocks along the rail spur. That means a tenant key that opens only their unit, a manager key that opens several, and a grand master on top. We survey the existing cylinders, key the pins to the chart, and hand you a written scope before any work starts. Call (833) 589-8049 for a walkthrough.
A standard Schlage rekey in South Houston runs $85 to $160, and deadbolt installation starts around $140 depending on door prep and hardware. Master key systems run higher because they’re surveyed and keyed to a chart rather than done on the spot. The price we quote on the phone is the price on the invoice. Call (833) 589-8049 for an exact number.
Service Areas Near South Houston
We work Schlage hardware across South Houston and the surrounding towns, including South Houston service area communities and nearby neighborhoods. You’ll also find us running calls in Schlage service in Galena Park and Schlage service in Deer Park where the housing stock and hardware mix overlap with what we see in 77587. We also cover Pecan Grove, Richmond, and a few other pockets within a short drive, so if you’re just across the line and need Schlage work, call us.
Book Your Schlage Service in South Houston Today
We rekeyed a 1950s bungalow off the rail corridor whose Schlage F-series deadbolt had seized from years of driving rain, then drove to a truck yard a few streets over that same afternoon to key-alike a row of gate padlocks onto one Schlage key. Same problem at both sites: Schlage hardware left exposed to Gulf humidity. We replaced the seized cylinder with OEM, cleaned the strikes, and handed the owner a single key that opens the house and the yard gate. That’s the work we do in South Houston. Need a key? We also offer Car Key Replacement – South Houston. Call Knight Locksmiths at (833) 589-8049 for a free estimate.
Written by Glen Pickett, Owner at Knight Locksmiths, serving South Houston and the surrounding area.